Balance de laboratoire de précision
ASTM EN DIN ISO COMME NZS
Mélangeur de laboratoire électrique
ASTM D1003
Méthode d'essai standard pour le voile et la transmission lumineuse des plastiques transparents
ASTM D1003 is a standard test method for measuring the haze and luminous transmittance of transparent plastics. Haze is a measure of the amount of light that is scattered by particles in a transparent material. Luminous transmittance is a measure of the amount of light that passes through a transparent material.
The test method is applicable to transparent plastics that are at least 1.5 mm thick. The sample is placed in a haze meter, and the amount of light that is scattered and transmitted is measured. The haze is then calculated from the measurements.
The test method provides two procedures for measuring haze:
- Procedure A: This procedure uses a hazemeter that is equipped with a 2.5° integrating sphere.
- Procedure B: This procedure uses a spectrophotometer that is equipped with a 2.5° integrating sphere.
Procedure A is the preferred procedure, as it is more accurate and reproducible. However, Procedure B can be used if a spectrophotometer is the only instrument available.
The test method also provides specifications for the haze and luminous transmittance of transparent plastics. The haze specifications vary depending on the application of the plastic. For example, the haze specification for a plastic that is used in a window is typically lower than the haze specification for a plastic that is used in a food packaging material.
ASTM D1003 is a valuable tool for quality control in the plastics industry. It can be used to ensure that plastics meet the required haze and luminous transmittance specifications.
Here are some of the key requirements of ASTM D1003:
- The hazemeter or spectrophotometer must be calibrated with a standard reference material.
- The hazemeter or spectrophotometer must be able to measure haze and luminous transmittance over a range of values.
- The hazemeter or spectrophotometer must be able to produce accurate and reproducible results.
- The sample must be clean and free of defects.
- The sample thickness must be at least 1.5 mm.
By meeting these requirements, ASTM D1003 can be used to reliably measure the haze and luminous transmittance of transparent plastics.
All our test instruments and test equipment and production machinery are designed and engineered in accordance with recognized international test standards including ASTM, AATCC, CIE, DIN EN ISO, MIL, Ford, Renault, AS NZS, TAPPI and many more.
All our products are carefully calibrated to ensure the expected high accuracy of your research and your quality management stages and sample tests.
In addition, we are always here to assist with additional calibration services at our Calibration Centers.
Soutien
Le service client à toutes les étapes et la loyauté envers nos clients, un service professionnel et la fourniture de produits, d'instruments et de machines de la meilleure qualité sont quatre de nos principales priorités pour vous assurer que vous et vos équipes d'experts serez enthousiasmés et satisfaits de la qualité fiable de nos produits, instruments et machines. Qualtech Products Industry a développé et institué un système de qualité et est certifié ISO 9001:2000. Nous nous engageons à évaluer et à mettre en œuvre des améliorations de la qualité dans tous nos processus de recherche et de production en veillant à ce que "la qualité soit livrée à votre entreprise". Veuillez demander à nos équipes amicales de l'aide, plus d'informations, des détails et des services disponibles engagés pour vous apporter de vraies valeurs en tant que client important.
Français du Canada 
English 
Dansk 
Deutsch 
Ελληνικά 
Español 
Español de México 
Suomi 
Français 
Italiano 
Nederlands 
Svenska 
Português